Autel MaxiTPMS TS608K --- A Professional And Affordable TPMS Tool
Autel TS608K is an upgraded version of MK808TS and MP808TS. As the whole new flagship TPMS Service & Diagnostic tool designed for workshops, TS608K comes with complete TPMS functions to activate & relearn all TPMS sensors(both OEM and aftermarket), program Autel MX-Sensors, view sensor data, pull TPMS codes & live data, reset TPMS lights, TPMS Toolkit, etc.
What Makes Autel TS608K Professional?
Top TPMS Function
1. Activate all known TPMS sensors and read sensor status
2. Diagnose ECU for complete TPMS health check with DTC description
3. Read DTCs from ECU and erase DTCs
4. Program MX-Sensors by copying original sensor IDs or creating new IDs randomly
5. On-tool relearn procedure and wide OBD relearn coverage
6. Toolkit, special TPMS functions
OE-Level Diagnosis
TS608K car diagnostic tool can perform OE-Level diagnosis on all car electronic systems like ABS, SRS, Engine, Transmission, Brake System and etc that you can find only on the most sophisticated scan tools. It covers all available vehicle modules, including but not limited to PCM, ECM, EPS, PDM, TPM, BCM, ABS, SCCM and etc. With complete capabilities for codes, live data, active test, ECU information, adaptation, matching and etc, the TS608K auto diagnostic scan tool is a professional diagnosis and service tool for technicians and home mechanics.
More than 28 Hot Service Functions
1). Oil Reset Service to reset service mileage and service intervals for the Engine Oil Life system;
2). TPMS Service to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements;
3). EPB Service to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.;
4). ABS/ SRS Services to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.;
5). SAS Service to perform calibration for the Steering Angle Sensor, and clear fault memory;
6). DPF Regeneration Service to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter
7). BMS Service performs a reset on the vehicle battery for clearing the fault information and re-match the battery;
8). Brake Bleed performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;
9). Injector Coding writes the new code to the ECU after replacement of injector, so that the injector works;
10). Throttle Adaptation initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;
11). Tire Pressure Monitor System Reset (TPMS Programming Service): Quickly looks up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.
and much more......
Wide Vehicle Coverage
Autel TS608K can go deep into every corner of 80+ model cars systems to diagnose and display all the information through a specific report, including Engine, Transmission, ABS, SRS, EPB, BMS, Air-Conditioning System, Body, Chassis, Powertrain, BCM, etc., on VW, Audi, Mercedes, BMW, Chrysler, Dodge, Jeep, Ford, GM, Toyota, Honda, etc.
