Autel MaxiPro MP808Z-TS MP808S-TS Diagnostic Scanner 2025
Autel MaxiPro MP808Z-TS, equipped with Full TPMS and Diagnostics, performs well both in your vehicle diagnosis and in
Full TPMS. It features Advanced ECU Coding, Top TPMS Functions, 32+ Hot Service Functions, All System Diagnosis, VAG
Guided Functions, Bi-directional Control, FCA AutoAuth, NO IP Restriction, adn Refresh Hidden Functions, allows you
to have both diagnostic and TPMS functions at the same time. So convenient!
Autel MaxiPro MP808Z-TS MP808S-TS Scan Tool also has Advanced Hardware, which combines Android 11, 4G & 64G of RAM & ROM,
Quad-core Rockchip RK3566 Processor, 2.4 & 5GHz WIFI, 7inch 1024x600 Resolution, and 5000mAh Battery, making it
run so fast.
Here are the features of this device:
- Powerful Diagnostic Functions
- Advanced ECU Coding
- Bi-Directional Control / Active Test
- 32+ Hot Service Functions
- OE-Level All System Diagnosis
- VAG Guided Functions
- Battery Test(with BT506)
- Endoscope Functions(with MV108S)
- FCA Auto Auth
- No IP Limitation
- Refresh Hidden Functions
- Comprehensive TPMS Features
- Activate TPMS Sensors
- TPMS Diagnostic System
- Autel MX-Sensors Programming
- TPMS Check & Reset & Retrofitting
Autel MaxiPro MP808Z-TS with Advanced ECU Coding
This MaxiPro MP808Z-TS has powerful ECU Coding Function, which is same as MS906TS / MS906BT / MS906 and will save
half Budget for you. This ECU Coding Function is able to work for BMW, Porsche, Nissan, VW, Hyundai, etc., which
allows you to reprogram the adaptive data after a repair or replacement.
What can this Function do for you?
- Online ECU Coding for BMW / Porsche / VW, etc
- Activate High-End Features
- Customization Settings
- Recode Adaptive Data After Replacement
- Fix Complex ECU Issues
- Improve your Vehicle Performance
Maybe you are always haunted by some details of your vehicle, now you can use this device to customize the
configuration already in the vehicle, such as one-click start/stop, seatbelt warning sounds, one-button folding
mirrors, etc. Also, there are VAG guided functions, which can simplify the complex functions and improve your
vehicle performance.
Note: Autel MaxiPro MP808Z-TS MP808S-TS ECU Coding Function is not
universal for all vehicles, if you are interested in this device, email us with your vehicle VIN for a
compatible check.
Autel MaxiPro MP808Z-TS with Powerful TPMS Diagnostic System
It is worth mentioning that the Autel MaxiPro MP808Z-TS is an Advanced TPMS Expert which can diagnose TPMS System
and Read/Clear Codes. Compare with MP808BT Pro / MP808S which don't support TPMS functions, this newly released
MaxiPro MP808Z-TS scanner performs to activate 99% TPMS sensors, program Autel MX-Sensors, TPMS Relearn, and TPMS sensor
retrofitting.
Activate 99% TPMS Sensors
- The Autel MaxiPro MP808Z-TS is able to trigger almost all known TPMS Sensors, and works in both 433 & 315 MHz
Sensor.
Program Autel MX-Sensor
- There are 2 ways to Program Autel MX-Sensor:Copy by OBD and Auto Create
-
Note: Autel MaxiPro MP808Z-TS Can only programming Autel
MX-sensors.
TPMS Relearn
- This function can help your newly replaced TPMS Sensors Work Properly, including OBD Relearn, Automatic
Relearn, Stationary Relearn.
Advanced TPMS Retrofit
- Here are some steps to perform the TPMS Retrofit Functions:
-
1. Backup Data Back up and save the data of the original vehicle
-
2. Code TPMS Encode TPMS with MaxiPro MP808Z-TS
-
3. Set up TPMS Set various parameters of TPMS
-
4. Program TPMS Module Program sensor into TPMS Module
-
5. Retrofit TPMS to Vehicle Dashboard Set TPMS parameter to Dashboard panels
Autel MaxiPro MP808Z-TS with All System Diagnostic & Bi-Directional Control
Autel MaxiPro MP808Z-TS Bi-Directional Control Scanner is able to quickly locate the defective location without using the
vehicle controls, including Fuel Pump, A/C Clutch, Injector Lights, Headlamp, etc. This function can actually
improve the diagnostic efficiency and save your more time!
It also performs comparable to the diagnostic capacity of the original factory. It works well to read & clear
codes, ECU information reading, read live data, view freeze frame, graphic data, and performs special functions
for all available systems.
The MaxiPro MP808Z-TS is your best choice for all system diagnostic, including Anti-lock Brake System(ABS), Electronic Parking Brake(EPB), Battery
Mange System(BMS), Supplemental Restraint System(SRS), Steering Angle System(SAS), Air Conditioning System,
etc.
MaxiPro MP808Z-TS Scanner with 32+ Hot Services Functions
With 32+ Powerful Maintenance Services, Autel MaxiPro MP808Z-TS MP808S-TS automotive diagnostic scanner features in: Oil Reset,
SAS, EPB, SRS, DPF, TPMS, Injector Reset, SAS Calibration, Auto Bleed, etc.
Injector Coding--- Code new injector numbers to replace the previous one when fitting the new injectors or
after the replacement is completed;
Brake Reset--- Deactivate and activate the brake control system, assist with brake fluid control, open and
close brake pads, etc.;
GEAR Learn--- Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or
the crankshaft flywheel is replaced.
Key Coding--- Help ECU to recognize the new keys when you need to add new keys, and delete the lost keys;
Oil Reset--- Reset the oil life systems every time the oil and oil filter are changed;
SAS Reset--- Perform steering angle sensor calibration and clear records;
BMS Reset--- Evaluate the battery charge state, register the battery replacement, etc.; More completed
battery and starter-related detail working with BT506;
ABS Bleeding--- When the ABS contains air, the ABS bleeding function must be performed to bleed the brake
system to restore ABS brake sensitivity;
Relearn Throttle--- Initialize the throttle so that the “learned” values stored on ECU are returned to the
default state;
DPF REG--- Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode
to stabilize the filter performance;
Autel MaxiPro MP808Z-TS Extensive Functions
FCA AutoAuth Compatible with 2018 & later
This function is compatible with Chrysler, Dodge, Romeo, Fiat, etc, and Auto auth account needs to purchased by
yourself, it performs to run diagnostics and services directly without extra adapter .
Work with MV105/108S & BT506
This MaxiPro MP808Z-TS is compatible with Autel Digital Inspection Cameras(MV105/108) and BT506 Battery Tester which is
sold separately and this MaxiPro MP808Z-TS will help you to check hard-to-see areas.
More help will be provided
Remote Desk allows you to quickly get the support from Autel's technicians
Autel MaxiPro MP808Z-TS with Wide Coverage
- US: Ford, FordEU, GM, Chrysler, Dodge, Jeep
- EU: BMW, MINI, BENZ, BENZ SPRINTER, Volvo, Land Rover, Porsche, Audi, Bentley, Seat, Skoda, etc.
- Asia: Toyota, Lexus, Nissan, Honda, Hyundai, Kia, etc.
Specifications about Autel MaxiPro MP808Z-TS
Brand |
Autel |
Model |
Autel MaxiPro MP808Z-TS |
Weight |
0.77kg |
CPU |
Rockchip RK3566 |
RAM |
4G |
ROM |
64G |
Battery Capacity |
5000 mAh |
Android version |
Android 11 |
Screen Size |
7 inch |
Screen resolution |
1024 x 600 |
Wi-Fi |
2.4 & 5 GHz |
HDMI |
HDMI Type A |
VCI |
VCI Mini |
MaxiPro MP808Z-TS Packing List
- 1x MaxiPro MP808Z-TS Main Unit
- 1x VCI Mini
- 1x Power Adapter
- 2x Mini USB Cable
- 1x Strap
- 1x Packing List
- 1x Soft Cloth
- 1x Carrying Case
MaxiPro MP808Z-TS Product guides and documents
MP808Z-TS
User Manual (PDF)
Autel MaxiPro MP808Z-TS Software Update
Autel MaxiPro MP808Z-TS Software Update