OTOFIX D1 Plus
OTOFIX D1 Plus is built to take your diagnostic experience to a whole new level, supporting smart diagnosis for all available vehicle systems and featuring up to 36 service functions. As an advanced intelligent automotive diagnostic analyzer, the D1 Plus offers exceptional OE-level diagnosis and DTC analysis. Combined with the OTOFIX cloud service, it provides you with one-stop solutions from diagnosis to fix.
On Board ECU Coding
OTOFIX D1 Plus professional auto scanner comes with an advanced ECU coding function. This function allows you to establish a data link to the electronic control system of the test vehicle via the VCI device for vehicle diagnosis, service or coding. You can operate functional tests, retrieve vehicle diagnostic information such as trouble codes, event codes and live data, and perform ECU coding, for various vehicle control systems, such as engine, transmission, ABS and more.
OE Level Diagnostic Function
OTOFIX D1 Plus features all system diagnosis, able to access all modules performing diagnosis over all the systems on the vehicle's ECU in order to locate fault systems and retrieve DTCs.
ECU Information - provides the retrieved ECU information in detail.
Read Codes - displays detailed information of DTC records retrieved from the vehicle control module.
Erase Codes - erases DTC records and other data from the ECM.
Live Data - retrieves and displays live data and parameters from the vehicle's ECU
It allows you to manually locate a required control system for testing through a series of choices. Simply follow the menu-driven procedure, and make proper selection each time; the application will guide you to the diagnostic function menu after a few choices you've made.
Available functions may vary slightly by vehicle. The function menu may include:
ECU information — displays detailed ECU information.
Read Codes — displays detailed DTC information retrieved from the vehicle control module.
Erase Codes — erases DTC records and other data from the vehicle's ECU
Live data — retrieves and displays live data and parameters from the vehicle's ECU.
The Active Test function is used to access vehicle-specific subsystem and component tests. During an active test, the tablet sends commands to the ECU to activate the actuators. This test determines the integrity of the system or part by reading ECU data, or by monitoring the operation of the actuators. Such tests may include switching a solenoid, relay, or switch, between two operating states.
Generic OBD II Operations
The OBDII/EOBD vehicle diagnosis offers a quick way to check for DTCs, isolate the cause of a dashboard illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform other emissions-related services.
36+ Hot Functions
Oil Reset Service - This function performs a reset of the Engine Oil Life system, which calculates the optimal oil life change interval depending on the vehicle driving conditions and climate.
Electric Parking Brake (EPB) - This function has a multitude of ways to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement.
Tire Pressure Monitoring System (TPMS) - This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and reset procedures after tire sensors are replaced.
Battery Management System (BMS) - The BMS allows the tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, activate the rest state of the vehicle, and charge the battery via the diagnostic socket.
Diesel Particle Filter (DPF) - The DPF function manages DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
Steering Angle Sensor (SAS) - Steering Angle Sensor (SAS) Calibration permanently stores the current steering wheel position as the straight-ahead position in the SAS EEPROM. Therefore, the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration.
OTOFIX D1 Bonus Function:
1. Remote Desktop
The Remote Desktop application launches the TeamViewer Quick Support program, which is a simple, fast and secure remote control interface. You can use the application to receive ad-hoc remote support from Autel's support center, colleagues or friends, by allowing them to control your MaxiSys tablet on their PC via the TeamViewer software.
2. Data Manager
The Data Manager application allows you to store, print, and review the saved files, manage the workshop information, and customer information records and keep test vehicle records.
3. Compatible With Inspection Camera And Battery Tester
The D1 Max can connect to Inspection cameras such as MV460, and it can also work with battery testers like BT508, to realize a real multi-function diagnostic tool.
4. Quick Link
The Quick Link application provides you with convenient access to Autel's official website and many other well-known sites in the automotive service industry to provide technical help, knowledge bases, forums, training and expert consultations.