MaxiIM IM608 is the most advanced and the unique all in one key programming and diagnostic tool that combines advanced key programming, all systems diagnostics, and advanced services in one Android-based 10.1-inch touchscreen tablet.
IM608 equipped with XP400 key programmer and MaxiFlash J2534 ECU programmer to provide complete coverage of IMMO and programming functions.
Together with the ability to quickly diagnose all modules of the majority of the makes and models on the market, IM608 provides you with all special functions.
NOTE: Autel IM608 is sold and to be used in the US only. There will be an IP restriction issue if you use it outside of the US.
Autel MaxiIM IM608 Advanced IMMO & Key Programming
Featured with Expert mode for advanced key learning, Smart mode for guided and automated key learning, IM608 supports Read PIN/CS (all key lost), generate key, key learning, remote learning...
XP400 Key & Chip Programmer
Support PC, MCU / EEPROM Chips Read / Write, ECU Read / Write, MC9S12 Encryption Chip Read / Write, Key Read / Write, Mercedes Infrared Key Read / Write, Remote Frequency Detect, IC Card Read/Write. Please note:No vehicle connection is required.
MaxiIM IM608 OE- Level Diagnostic & Service
- Read & Clear Fault Codes | Short description & code provided (can clear faults & warning lights)
- Service Functions | All special functions, EPB, DPF, SAS, Oil reset, BMS, TPMS sensor ID relearn, etc.
- Access Live Data | Data from the ECU/Modules/sensors displayed in real-time (Oxygen sensor-rich/lean etc)
- Actuation/Component Testing | Actuate (switch on/off) to diagnose functionality (relays, fans, locks etc)
- Coding Functions | Allows you to change vehicle parts that need to be ‘coded’ (Injectors, ABS, starters etc)
- Flashing/Reprogramming | Advanced updating/coding of ECU’s online through a J2534 pass-through flashing device
- Advanced Key Programming | IMMO functions, Transponder read/write/identify, MCU/EEPROM chip read/write
IM608 Advanced ECU Programming with J2534
Autel IM608 with MaxiFlash J2534 ECU Programmer (Bluetooth/USB cable connected) for vehicle control modules reprogram after repairs or replacements.
IM608 IMMO Vehicle List
IM608 IMMO Functions can work on: Audi, BMW, Ferrari, Fiat, Ford, Foton, Chery, Chrysler, Citroen, Dodge, Infiniti, Kia, Jeep, Landrover, MINI, Mazda, Mercedes-Benz, Maserati, Nissan, Peugeot, Porsche, Rolls-Royce, Saab, Seat, Skoda, Suzuki, Toyota, VOLVO, Volkswagen, etc 60+ Vehicle Makes. Detailed coverage list (select IM608(IMMO) from the drop down)
NOTE: IM608 can work on most vehicles not all, so please enter your car's Model & Years to further confirm
Autel MaxiIM IM608 Specification
|Operation System||Android 4.4.2,KitKat|
|Processor||Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15)|
|Memory||2GB RAM & 64 GB On-board Memory|
|Display||10.1-inch LED capacitive touch screen with 1920*1200 resolution;|
|Connectivity||Wi-Fi：(802.11 a/b/g/n/ac); USB 2.0; BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI|
|Camera(rear)||8.0 Megapixel, AF with Flashlight|
|Sensors||Gravity Accelerometer, Ambient Light Sensor (ALS)|
|Audio||Microphone; Dual Speakers|
|Input/output||3-Band 3.5mm stereo / standard headset jack|
|Power and Battery||Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃|
|Input Voltage||12V (9-24V)|
|Operating Temp||0℃ to 50℃ (32 to 122℉)|
|Storage Temp||-20℃ to 60℃ (-4 to 140℉)|
|Dimensions(W*H*D)||300mm (11.81") x 220.0mm (8.66") x 50.0mm (1.97")|
|Weight NW||1.42kg (3.13lb.)|
|Protocols||ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN|
Autel MaxiIM IM608 Package List:
- 1x Autel MaxiIM IM608 Main Unit
- 1x APC101 USB Cable
- 1x APA101 Signal Cable
- 1x MaxiFlash JVCI
- 1x APB101+ APD101 (EEPROM Adaptor + EEPROM Adapter Shell)
- 1x APA103 (EEPROM Clamp)
- 1x XP400
- 1x APB102 MB IR Cable
- 1x APA104 ECU Clamp
- 1x Main Cable
- 1x APB104 (MCU_FQFP64)
- 1x APA105 (MCU Clamp)
- 1x USB Cable (2m)
- 1x APB105 MCU_FQFP80
- 1x APA106 (MC9S12 Clamp)
- 1x Mini USB Cable
- 1x APB106 (MCU_FQFP144)
- 1x APA107 (Connect Cable)
- 1x AC/DC 12V Adapter
- 1x APB107 (MCU_FQFP144)
- 1x Quick Reference Guide
- 2x Light Fuse 6*30mm
- 1x APB108 (MCU_FQFP176)
- 1x Packing List
- 1x Cigarette Lighter
- 1x APA002 (EEPROM Socket)
- 1x Carrying Case 634*170*404mm
- 1x AAC001
Im608 program a Keyless to my Toyota Camry 2018 success
I decided to buy the IM608 to reprogram a new key for my 2003 Honda Pilot. Luckily this scanner tool was on lightning deal and was able to get at a discount. I wasn't sure if it will be able to reprogram the key but it worked on the first try. So now I have a professional level scan tool and a reprogrammed key. I'm a DIY home mechanic so with this tool i'll be able to diagnose my cars more extensively.
It works on all cars! Overall, money well spent.
I got this item very fast and it works. program keys on two cars.
Great scanner and easy to use.This was well worth the envestment. The price was great.I highly recommend this IM608,It is equipped with XP400 key programmer and MaxiFlash ECU programmer to provide coverage of IMMO and programming functions.