Autel MaxiBAS BT506 --- A Superb Cost Effective Battery Tester

0 comments

The Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold-cranking ability and reserve capacity.

 BT506 enables technicians to view the health status of the vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results.

Highlights:

1. Includes Connected Cable with Clamps
2. Test 6- and 12-Volt Batteries: 100 - 2000 CCA
3. Test 12- and 24-Volt Cranking/ Charging Systems
4. Test Flooded, AGM, AGM_Spiral, EFB and GEL Batteries
5. Battery Health Report/ Temperature Compensation / Cloud-Based Service
6. Battery Ratings: Compatible with CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
7. Support In-Vehicle and Out-of-Vehicle Testing of Passenger Vehicle Batteries
* Out-of-vehicle Battery testsing
* In-vehicle testing of Battery, Starter, Charging system voltage (not amps)

What Convenience Does BT506 Bring You?

Autel battery tester MaxiBAS BT506 applies Adaptive Conductance to gauge a battery’s conductance health. Compared with ordinary load testers, this technology allows multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.

Following is the Benefits of Adaptive Conductance Technology:

* Test Accuracy Rate by 94.11%;
* Bad Battery Detection Rate by 63.55%;
* Reduce Charge & Retest Rate by 30.03%.

With the Adaptive Conductance Technology, BT506 realizes faster diagnosis and higher efficiency.

Cranking And Charging System Test

BT506 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator), Same as BT608.

1. In-Vehicle Test:

* Battery Test:
With the clear guidance on the screen, you can do the battery test. And the battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips.

* Starter Test:
Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will display on the screen which include starting voltage, starting current and starting time.

* Generator Test:
Through the alternator test, technicians are able to check the load voltage/current, no load voltage/current, and ripple. The direct test result on the screen will tell you whether the charging is normal, and whether there is an issue with the output or ripple, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.

2. Out-Vehicle Test:

Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.

3. Automativally Identify Battery Type:

Clamp the BT506 to a in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.

* BatteryTypes: FLOODED, AGM, AGM SPIRAL, EFB, and GEL;
* Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA.

Item
Autel BT506
Autel BT508
Autel BT608
Autel BT609
Software
Operating System
×
×
Android 9.0
Android 9.0
Hardware
Screen
×
×
5.5-inch touchscreen/ 720*1280
7.0-inch touchscreen/ 1280*800
Processor
Cortex-M4
Cortex-M4
Cotex-A35 Quad-core, 1.5Ghz
Cotex-A35 Quad-core, 1.5Ghz
Memory/RAM
×
×
32GB/2GB
64GB/2GB
Battery
×
×
3000mAh, 6H
6000mAh, 6H
Camera
×
×
8mp
8mp
Features
CCA Range
100-2000 CCA
100-2000 CCA
100-3000 CCA
100-3000 CCA
Battery Type
Flooded, AGM, AGM Spiral, EFB, GEL
Flooded, AGM, AGM Spiral, EFB, GEL
Flooded, AGM, AGM Spiral, EFB, GEL
Flooded, AGM, AGM Spiral, EFB, GEL
Battery Ratings
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
Battery Voltage
6V, 12V
6V, 12V
6V, 12V
6V, 12V
Electrical System
12V, 24V
12V, 24V
12V, 24V
12V, 24V
Voltage Range
1.5V-36V
1.5V-36V
1.5V-36V
1.5V-36V
Temperature Compensation
Battery Registration
×
53 vehicle makes
53 vehicle makes
53 vehicle makes
Electrical Reset
×
System Detection
×
AutoVIN
AutoVIN, VINScan, Plate Scan
AutoVIN, VINScan, Plate Scan
Battery Location Diagrams
Battery Health Report
×
Built-in Printer
×
×
×
Email Report
Cloud-base Service
Multimeter
×
×
Optional
Optional
Amp Clamp
×
×
Optional
Optional
Diagnostics
All System Diagnostics With AutoSCAN
×
(One vehicle brand ONLY)
All Maintenance Service Resets
×
×
×
Diagnostic Software Update
×
Change for additional vehicle brands and annual update
No annual update fee
Annual update fee

Leave a comment

All blog comments are checked prior to publishing
    You have successfully subscribed!
    This email has been registered
    ico-collapse
    ic-cross-line-top
    Top
    ic-expand
    ic-cross-line-top